snmp-server host
Configure the recipient of an SNMP trap operation.
Syntax
snmp-server host
ip-address
[traps | informs] [version 1 | 2c |
3] [auth | no auth | priv] [
community-string
] [udp-port
port-
number
] [
notification-type
]
To remove the SNMP host, use the
no snmp-server host
ip-address
[traps | informs] [version 1 | 2c | 3] [auth | noauth | priv]
[
community-string
] [udp-port
number
] [
notification-type
]
command.
Parameters
ip-address
Enter the keyword
host
then the IP address of the host
(configurable hosts is limited to 16).
traps
(OPTIONAL) Enter the keyword
traps
to send trap
notifications to the specified host. The default is
traps
.
informs
(OPTIONAL) Enter the keyword
informs
to send inform
notifications to the specified host. The default is
traps
.
version 1 | 2c |
3
(OPTIONAL) Enter the keyword version to specify the
security model then the security model version number
1
,
2c
, or
3
:
• Version
1
is the least secure version.
• Version
3
is the most secure of the security modes.
• Version
2c
allows transmission of informs and counter
64, which allows for integers twice the width of what is
normally allowed.
The default is version
1
.
auth
(OPTIONAL) Enter the keyword
auth
to specify
authentication of a packet without encryption.
noauth
(OPTIONAL) Enter the keyword
noauth
to specify no
authentication of a packet.
priv
(OPTIONAL) Enter the keyword
priv
to specify both
authentication and then scrambling of the packet.
community-
string
Enter a text string (up to 20 characters long) as the name of
the SNMP community.
NOTE: For version 1 and version 2c security models, this
string represents the name of the SNMP community. The
string can be set using this command; however, Dell
Networking OS recommends setting the community
string using the
snmp-server community
command
before executing this command. For version 3 security
model, this string is the USM user security name.
Simple Network Management Protocol (SNMP) and Syslog
1231
