static
Enter the keyword
static
to redistribute manually
configured routes.
These routes are treated as incomplete routes.
route-map
map-name
(OPTIONAL) Enter the keyword
route-map
then the name
of an established route map.
Only the following ROUTE-MAP mode commands are
supported:
•
match ip address
•
set metric
•
set tag
If the route map is not configured, the default is
deny
(to
drop all routes).
Defaults
Not configured.
Command
Modes
ROUTER BGP
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
With the Dell Networking OS version 8.3.1.0 and later, you can use the
redistribute
command to advertise the IGP cost as the MED on redistributed
routes. When you set the route-map with metric-type internal and applied
outbound to an EBGP peer/peer-group, the advertised routes corresponding to
those peer/peer-groups have the IGP cost set as
MED
.
If you do not configure the
default-metric
command, in addition to the
redistribute
command, or there is no route map to set the metric, the metric
for redistributed static and connected is “0”.
To redistribute the default route (0.0.0.0/0), configure the
neighbor default-
originate
command.
Related
Commands
neighbor default-originate
— injects the default route.
redistribute ospf
Redistribute OSPF routes into BGP.
Syntax
redistribute ospf
process-id
[[match external {1 | 2}] [match
internal]] [route-map
map-name
]
Border Gateway Protocol IPv4 (BGPv4)
359
