unit
and
port (
1-56
)
, and
queue
(
0-14
or
all
), and
buffer-info
. The buffer unit default is
1
.
phy-firmware-
version
Each member of the stack is updated automatically with the
latest firmware while booting as well as during OIR. To dump
the physical firmware version for stack units, enter the
keywords
phy-firmware-version
.
cpu data-plane
statistics
(Optional) Enter the keywords
cpu data-plane
statistics
then the keywords
stack port
and its
number from 0 to 52 to display the data plane statistics,
which shows the High Gig (Higig) port raw input/output
counter statistics to which the stacking module is
connected.
cpu party-bus
statistics
Enter the keywords
cpu party-bus statistics
, to
display the Management plane input/output counter
statistics of the pseudo party bus interface.
cpu private-
mgmt statistics
Enter the keywords
cpu private-mgmt statistics
, to
display the Management plane input/output counter
statistics of the Private Management interface.
drops [unit
0-0
[port
1-56
]]
Enter the keyword
drops
to display internal drops on the
selected stack member. Optionally, use the keyword
unit
with 0 to select port-pipe 0, and then use
port
1-56
to
select a port on that port-pipe.
stack-port
33–
56
Enter the keywords
stack-port
and a stacking port number
to select a stacking port for which to display statistics.
Identify the stack port number as you would to identify a 10G
port that was in the same place in one of the rear modules.
NOTE: You can identify stack port numbers by physical
inspection of the rear modules. The numbering is the
same as for the 10G ports. You can also inspect the
output of the
show system stack-ports
command.
unit
0–0
{counters |
details | port-
stats [detail] |
register}
Enter the keyword
unit
then 0 for port-pipe 0, and then
enter one of the following keywords to troubleshoot errors
on the selected port-pipe and to give status on why a port is
not coming up to register level:
counters
,
details
,
port-
stats [detail]
, or
register
.
Defaults
none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#show hardware stack-unit 0 phy-firmware-version
PortNumber Status Programmed Version SW Version
Debugging and Diagnostics
475
