manualshive.com logo in svg

Dell MXL 10GbE, Справочное руководство

Поделиться
Скачать
Dell MXL 10GbE Скачать руководство пользователя страница 1469

interface range

This command permits configuration of a range of interfaces to which subsequent commands are 
applied (bulk configuration). Using the 

interface range

 command, you can enter identical commands 

for a range of interface.

Syntax

interface range 

interface

, 

interface

,...

Parameters

interface, 
interface,...

Enter the keywords 

interface range

 and one of the 

interfaces — slot/port, port-channel, or VLAN number. Select 
the range of interfaces for bulk configuration. You can enter 
up to six comma-separated ranges. Spaces are not required 
between the commas. Comma-separated ranges can 
include VLANs, port-channels, and physical interfaces.

Slot/Port information must contain a space before and after 
the dash. For example, 

interface range 

gigabitethernet 0/1 - 5

 is valid; 

interface range 

gigabitethernet 0/1-5

 is NOT valid.

• For a Port Channel interface, enter the keywords 

port-

channel

 then a number. The range is from 1 to 128.

• For a 10-Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet

 then the slot/port information.

• For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE

 then the slot/port information.

• For a VLAN interface, enter the keyword 

vlan

 then a 

number from 1 to 4094.

Defaults

none

Command 
Modes

CONFIGURATION

Command 
History

Version 9.2(0.0)

Introduced on the M I/O Aggregator. This command is 
supported in Programmable-Mux (PMUX) mode only.

Version 8.3.16.1

Introduced on the MXL 10/40GbE Switch IO Module.

Usage 
Information

When creating an interface range, interfaces appear in the order they are entered; 
they are not sorted. The command verifies that interfaces are present (physical) or 
configured (logical).

Important Points to Remember:

• Bulk configuration is created if at least one interface is valid.
• Non-existing interfaces are excluded from the bulk configuration with a 

warning message.

• The 

interface range

 prompt includes interface types with slot/port 

information for valid interfaces. The prompt allows for a maximum of 32 

PMUX Mode of the MXL 10/40GbE Switch I/O Module

1469

Содержание MXL 10GbE










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды