manualshive.com logo in svg

Dell MXL 10GbE, Справочное руководство

Поделиться
Скачать
Dell MXL 10GbE Скачать руководство пользователя страница 1410

fcoe priority-bits

Configure the FCoE priority advertised for the FCoE protocol in application priority TLVs.

Syntax

fcoe priority-bits 

priority-bitmap

To remove the configured FCoE priority, use the 

no fcoe priority-bits 

command.

Parameters

priority-bitmap

Enter the priority-bitmap range. The range is from 1 to FF.

Defaults

0x8

Command 
Modes

PROTOCOL LLDP

Command 
History

Version 9.3.0.0

Introduced on the FC Flex IO module installed in the M I/O 
Aggregator and MXL 10/40GbE Switch

Usage 
Information

This command is available at the global level only.

fcoe-map

Create an FCoE map which contains the parameters used to configure the links between server CNAs 

and a SAN fabric. Apply the FCoE map on a server-facing Ethernet port.

M I/O Aggregator and MXL 10/40GbE Switch with the FC Flex IO module

Syntax

fcoe-map 

map-name

Parameters

map-name

Maximum: 32 alphanumeric characters.

Defaults

None on the MXL 10/40GbE Switch with FC Flex IO modules

On the I/O Aggregator with FC Flex IO modules, the following parameters are 
applied on all the FC Flex IO module interfaces:

• Description: SAN_FABRIC
• Fabric-id: 1002
• Fcoe-vlan: 1002
• Fc-map: 0x0efc00
• Fcf-priority: 128
• Fka-adv-period: 8000mSec
• Keepalive: enable
• Vlan priority: 3

1410

FC Flex IO Modules

Содержание MXL 10GbE










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды