Parameters
ip-address
(OPTIONAL) Enter the IP address of the neighbor in dotted
decimal format.
seconds
Enter a number as the time interval, in seconds, before BGP
route updates are sent. The range is from 0 to 3600 seconds.
Defaults
none
Command
Modes
ROUTER BGP
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
neighbor allowas-in
Set the number of times an AS number can occur in the AS path.
Syntax
neighbor {
ip-address
|
peer-group-name
} allowas-in
number
To return to the default value, use the
no neighbor {
ip-address
|
peer-
group-name
} allowas-in
command.
Parameters
ip-address
(OPTIONAL) Enter the IP address of the neighbor in dotted
decimal format.
peer-group-
name
Enter the name of the peer group to set the advertisement
interval for all routers in the peer group.
number
Enter a number of times to allow this neighbor ID to use the
AS path. The range is from 1 to 10.
Defaults
Not configured.
Command
Modes
ROUTER BGP
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
bgp four-octet-as-support
— enables 4-byte support for the BGP process.
340
Border Gateway Protocol IPv4 (BGPv4)
