neighbor ebgp-multihop
Attempt and accept BGP connections to external peers on networks that are not directly connected.
Syntax
neighbor {
ip-address
|
peer-group-name
} ebgp-multihop [
ttl
]
To disallow and disconnect connections, use the
no neighbor {
ip-address
|
peer-group-name
} ebgp-multihop
command.
Parameters
ip-address
Enter the IP address of the neighbor in dotted decimal
format.
peer-group-
name
Enter the name of the peer group.
ttl
(OPTIONAL) Enter the number of hops as the Time to Live
(ttl) value. The range is from 1 to 255. The default is
255
.
Defaults
Disabled.
Command
Modes
ROUTER BGP
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
To prevent loops, the
neighbor ebgp-multihop
command does not install the
default routes of the multihop peer. Networks not directly connected are not
considered valid for best-path selection.
neighbor fall-over
Enable or disable fast fall-over for BGP neighbors.
Syntax
neighbor {
ipv4-address
|
peer-group-name
} fall-over
To disable, use the
no neighbor {
ipv4-address
|
peer-group-name
}
fall-over
command.
Parameters
ipv4-address
Enter the IP address of the neighbor in dotted decimal
format.
peer-group-
name
Enter the name of the peer group.
Defaults
Disabled.
Command
Modes
ROUTER BGP
Border Gateway Protocol IPv4 (BGPv4)
343
