manualshive.com logo in svg

Dell MXL 10GbE, Справочное руководство

Поделиться
Скачать
Dell MXL 10GbE Скачать руководство пользователя страница 823

net

To configure an IS-IS network entity title (NET) for a routing process, use this mandatory command. If 
you did not configure a NET, the IS-IS process does not start.

Syntax

net 

network-entity-title

To remove a net, use the 

no net 

network-entity-title

 command.

Parameters

network-
entity-title

Specify the area address and system ID for an IS-IS routing 
process. The first 1 to 13 bytes identify the area address. The 
next 6 bytes identify the system ID. The last 1 byte is the 
selector byte, always identified as zero zero (00). This 
argument can be applied to an address or a name.

Defaults

Not configured.

Command 
Modes

ROUTER ISIS

Command 
History

Version 9.2(0.0)

Introduced on the MXL 10/40GbE Switch IO Module.

passive-interface

Suppress routing updates on an interface. This command stops the router from sending updates on that 

interface.

Syntax

passive-interface 

interface

To delete a passive interface configuration, use the 

no passive-interface 

interface

 command.

Parameters

interface

Enter the following keywords and slot/port or number 
information:

• For a 1-Gigabit Ethernet interface, enter the keyword 

GigabitEthernet

 then the slot/port information.

• For Loopback interface, enter the keyword 

loopback 

then a number from 0 to 16383.

• For a Port Channel interface, enter the keywords 

port-

channel

 then a number. The range is from 1 to 128.

• For a SONET interface, enter the keyword 

sonet

 then the 

slot/port information.

• For a 10-Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet

 then the slot/port information.

• For a VLAN, enter the keyword 

vlan

 then a number from 

1 to 4094.

Intermediate System to Intermediate System (IS-IS)

823

Содержание MXL 10GbE










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды