Dell MXL 10GbE, Справочное руководство

Страница: 57 / 1545

2. Enter the
protocol spanning-tree pvst
command. The prompt changes to include (
conf-
pvst
).
You can return to CONFIGURATION mode by using the
exit
command.
PREFIX-LIST Mode
To configure a prefix list, use PREFIX-LIST mode.
To enter PREFIX-LIST mode:
1. Verify that you are logged in to CONFIGURATION mode.
2. Enter the
ip prefix-list
command. Include a name for the prefix list. The prompt changes to
include (
conf-nprefixl
).
You can return to CONFIGURATION mode by using the
exit
command.
PROTOCOL GVRP Mode
To enable and configure GARP VLAN Registration Protocol (GVRP), use PROTOCOL GVRP mode. For
more information, refer to
GARP VLAN Registration (GVRP) .
To enter PROTOCOL GVRP mode:
1. Verify that you are logged in to CONFIGURATION mode.
2. Enter the
protocol gvrp
command. The prompt changes to include (
config-gvrp
).
You can return to CONFIGURATION mode by using the
exit
command.
RAPID SPANNING TREE (RSTP) Mode
To enable and configure RSTP, use RSTP mode. For more information, refer to Rapid Spanning Tree
Protocol (RSTP) .
To enter RSTP mode:
1. Verify that you are logged in to CONFIGURATION mode.
2. Enter the
protocol spanning-tree rstp
command. The prompt changes to include (
conf-
rstp
).
You can return to CONFIGURATION mode by using the
exit
command.
ROUTE-MAP Mode
To configure a route map, use ROUTE-MAP mode.
To enter ROUTE-MAP mode:
1. Verify that you are logged in to CONFIGURATION mode.
2. Use the
route-map map-name [permit | deny] [ sequence-number ]
command. The prompt
changes to include (
config-route-map
).
You can return to CONFIGURATION mode by using the
exit
command.
ROUTER OSPF Mode
To configure OSPF, use ROUTER OSPF mode. For more information, refer to Open Shortest Path First
(OSPF) .
CLI Basics
57