Parameters
ipv6-address
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
peer-group-
name
Enter the name of the peer group to apply the filter to all
routers in the peer group.
in
Enter the keyword
in
to filter inbound BGP routes.
out
Enter the keyword
out
to filter outbound BGP routes.
Defaults
Not configured.
Command
Modes
ROUTER BGPV6-ADDRESS FAMILY
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
neighbor maximum-prefix
Control the number of network prefixes received.
Syntax
neighbor {
ipv6-address
|
peer-group-name
} maximum-prefix
maximum
[
threshold
] [warning-only]
To return to the default values, use the
no neighbor {
ipv6-address
|
peer-
group-name
} maximum-prefix
maximum
[
threshold
] [warning-only]
command.
Parameters
ipv6-address
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
peer-group-
name
Enter the name of the peer group.
maximum
Enter a number as the maximum number of prefixes allowed
for this BGP router. The range is from 1 to 4294967295.
threshold
(OPTIONAL) Enter a number to be used as a percentage of
the maximum value. When the number of prefixes reaches
this percentage of the maximum value, the software sends a
message. The range is from 1 to 100 percent. The default is
75
.
warning-only
(OPTIONAL) Enter the keyword
warning-only
to set the
router to send a log message when the maximum value is
reached. If this parameter is not set, the router stops peering
when the maximum number of prefixes is reached.
IPv6 Border Gateway Protocol (IPv6 BGP)
727
