Dell MXL 10GbE, Справочное руководство

Страница: 304 / 1545

multiplier value Enter the keyword
multiplier
to specify the number of
packets that must be missed in order to declare a session
down. The range is from 3 to 50. The default is
3 .
role [active |
passive] Enter the role that the local system assumes:
•
Active
— The active system initiates the BFD session.
Both systems can be active for the same session.
•
Passive
— The passive system does not initiate a
session. It only responds to a request for session
initialization from the active system.
The default is Active .
Defaults See Parameters
Command
Modes INTERFACE
Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
isis bfd all-neighbors
Enable BFD on all IS-IS neighbors discovered on an interface.
Syntax
isis bfd all-neighbors [disable | [interval interval min_rx
min_rx multiplier value role {active | passive}]]
To remove all BFD sessions with IS-IS neighbors discovered on this interface, use
the
no isis bfd all-neighbors [disable | [interval interval
min_rx min_rx multiplier value role {active | passive}]]
command.
Parameters
disable (OPTIONAL) Enter the keyword
disable
to disable BFD on
this interface.
interval
milliseconds
(OPTIONAL) Enter the keywords
interval
to specify non-
default BFD session parameters beginning with the
transmission interval. The range is from 50 to 1000. The
default is
100 .
min_rx
milliseconds
Enter the keywords
min_rx
to specify the minimum rate at
which the local system would like to receive control packets
from the remote system. The range is from 50 to 1000. The
default is
100 .
multiplier value Enter the keywords
multiplier
to specify the number of
packets that must be missed in order to declare a session
down. The range is from 3 to 50. The default is
3 .
304
Bidirectional Forwarding Detection (BFD)