manualshive.com logo in svg

Dell MXL 10GbE, Справочное руководство

Поделиться
Скачать
Dell MXL 10GbE Скачать руководство пользователя страница 1440

priority-list

Configure the 802.1p priorities for the traffic on which you want to apply an ETS output policy.

Syntax

priority-list 

value

To remove the priority list, use the 

no priority-list

 command.

Parameters

value

Enter the priority list value. Separate priority values with a 
comma; specify a priority range with a dash; for example, 
priority-list 3,5-7. The range is from 0 to 7.

Defaults

none

Command 
Modes

PRIORITY-GROUP

Command 
History

Version 9.2(0.0)

Introduced on the M I/O Aggregator. This command is 
supported in Programmable-Mux (PMUX) mode only.

Version 8.3.16.1

Introduced on the MXL 10/40GbE Switch IO Module.

Usage 
Information

By default:

• All 802.1p priorities are grouped in priority group 0.
• 100% of the port bandwidth is assigned to priority group 0. The complete 

bandwidth is equally assigned to each priority class so that each class has 12 to 

13%.

NOTE: Please note that Dell Networking does not recommended to use 

this command as it has been deprecated in the current 9.4(0.0) release. A 

warning message appears when you try to run this command indicating 

that you have to use the 

dcb-map

 commands in the future.

Related 
Commands

•

priority-group qos-policy

 — associates an ETS priority group with an ETS 

output policy.

•

set-pgid

 — configures the priority-group.

qos-policy-output ets

To configure the ETS bandwidth allocation and scheduling for priority traffic, create a QoS output policy.

Syntax

qos-policy-output 

policy-name

 ets

To remove the QoS output policy, use the 

no qos-policy-output ets 

command.

Parameters

policy-name

Enter the policy name. The maximum is 32 characters.

1440

PMUX Mode of the MXL 10/40GbE Switch I/O Module

Содержание MXL 10GbE










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды