To remove the description, use the
no description {
description
}
command.
Parameters
description
Enter a description to identify the RIP protocol (80
characters maximum).
Defaults
none
Command
Modes
ROUTER RIP
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module..
Related
Commands
router rip
— enters ROUTER mode on the switch.
distance
Assign a weight (for prioritization) to all routes in the RIP routing table or to a specific route. Lower
weights (“administrative distance”) are preferred.
Syntax
distance
weight
[
ip-address mask
[
prefix-name
]]
To return to the default values, use the
no distance
weight
[
ip-address
mask
]
command.
Parameters
weight
Enter a number from 1 to 255 for the weight (for
prioritization). The default is
120
.
ip-address
(OPTIONAL) Enter the IP address, in dotted decimal format
(A.B.C.D), of the host or network to receive the new distance
metric.
mask
If you enter an IP address, also enter a mask for that IP
address, in either dotted decimal format or /prefix format
(/x).
prefix-name
(OPTIONAL) Enter a configured prefix list name.
Defaults
weight =
120
Command
Modes
ROUTER RIP
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
default-metric
— assigns one distance metric to all routes learned using the
redistribute
command.
1116
Routing Information Protocol (RIP)
