To use the closest interface, use the
no neighbor {
ip-address
|
peer-
group-name
} update-source
interface
command.
Parameters
ip-address
Enter the IP address of the peer router in dotted decimal
format.
peer-group-
name
Enter the name of the peer group to disable all routers within
the peer group.
interface
Enter the keyword
loopback
then a number of the
Loopback interface. The range is from 0 to 16383.
Defaults
Not configured.
Command
Modes
ROUTER BGP
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
Loopback interfaces are up constantly and the BGP session may need one
interface constantly up to stabilize the session. The
neighbor update-source
command is not necessary for directly connected internal BGP sessions.
neighbor weight
Assign a weight to the neighbor connection, which is used to determine the best path.
Syntax
neighbor {
ip-address
|
peer-group-name
} weight
weight
To remove a weight value, use the
no neighbor {
ip-address
|
peer-
group-name
} weight
command.
Parameters
ip-address
Enter the IP address of the peer router in dotted decimal
format.
peer-group-
name
Enter the name of the peer group to disable all routers within
the peer group.
weight
Enter a number as the weight. The range is from 0 to 65535.
The default is
0
.
Defaults
0
Command
Modes
ROUTER BGP
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
356
Border Gateway Protocol IPv4 (BGPv4)
