manualshive.com logo in svg

Dell MXL 10GbE, Справочное руководство

Поделиться
Скачать
Dell MXL 10GbE Скачать руководство пользователя страница 546

• If the IP SA of the incoming IGMP general query is higher than the VLAN IP address, the switch 

continues to work as an IGMP snooping Querier.

ip igmp access-group

To specify access control for packets, use this feature.

Syntax

ip igmp access-group 

access-list

To remove the feature, use the 

no ip igmp access-group 

access-list 

command.

Parameters

access-list

Enter the name of the extended ACL (16 characters 
maximum).

Defaults

Not configured

Command 
Modes

INTERFACE (conf-if-

interface-slot/port

)

Command 
History

Version 8.3.16.1

Introduced on the MXL 10/40GbE Switch IO Module.

Usage 
Information

The access list accepted is an extended ACL. To block IGMP reports from hosts, on 
a per-interface basis based on the group address and source address that you 
specify in the access list, use this feature.

ip igmp group-join-limit

To limit the number of IGMP groups that can be joined in a second, use this feature.

Syntax

ip igmp group-join-limit 

number

Parameters

number

Enter the number of IGMP groups permitted to join in a 
second. The range is from 1 to 10000.

Defaults

none

Command 
Modes

CONFIGURATION (conf-if-

interface-slot/port

)

Command 
History

Version 8.3.16.1

Introduced on the MXL 10/40GbE Switch IO Module.

546

Internet Group Management Protocol (IGMP)

Содержание MXL 10GbE










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды