Dell MXL 10GbE, Справочное руководство

Страница: 393 / 1545

Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
distance bgp
Define an administrative distance for routes.
Syntax
distance bgp external-distance internal-distance local-distance
To return to default values, use the
no distance bgp
command.
Parameters
external-
distance Enter a number to assign to routes learned from a neighbor
external to the AS. The range is from 1 to 255. The default is
20 .
internal-
distance Enter a number to assign to routes learned from a router
within the AS. The range is from 1 to 255. The default is
200 .
local-distance Enter a number to assign to routes learned from networks
listed in the network command. The range is from 1 to 255.
The default is
200 .
Defaults
• external-distance = 20
• internal-distance = 200
• local-distance = 200
Command
Modes ROUTER BGP (conf-router_bgp_af)
Command
History
Version 9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
CAUTION: Dell Networking OS recommends that you do not change the
administrative distance of internal routes. Changing the administrative
distances may cause routing table inconsistencies.
The higher the administrative distance assigned to a route means that your
confidence in that route is low. Routes assigned an administrative distance of 255
are not installed in the routing table. Routes from confederations are treated as
internal BGP routes.
Border Gateway Protocol IPv4 (BGPv4)
393