manualshive.com logo in svg

Dell MXL 10GbE, Справочное руководство

Поделиться
Скачать
Dell MXL 10GbE Скачать руководство пользователя страница 1078

Command 
History

Version 8.3.16.1

Introduced on the MXL 10/40GbE Switch IO Module.

Usage 
Information

After you configure a unicast queue as strict-priority, that particular queue, on the 
entire chassis, is treated as a 

strict-priority queue

. Traffic for a strict priority 

is scheduled before any other queues are serviced. For example, if you send 100% 
line rate traffic over the SP queue, it starves all other queues on the ports on which 
this traffic is flowing. To assign the strict priority schedule type to egress queues, 
use the 

scheduler strict

 command in QOS-POLICY-OUT mode. The system 

OS does not support bandwidth configuration on strict priority scheduler queues.

When you enable ETS, the egress QoS features in the output QoS policy-map (such 
as 

strict priority unicast <0-3>

 and 

scheduler strict

), default 

scheduler for egress queues are superseded by ETS configurations. This is to 
provide compatibility with DCBX. Therefore, Dell Networking OS recommends 
disabling ETS when you wish to apply these features exclusively. After you disable 
ETS on an interface, the configured parameters are applied.

Policy-Based QoS Commands

Policy-based traffic classification is handled with class maps. These maps classify unicast traffic into one 

of four classes. The system allows you to match multiple class maps and specify multiple match criteria. 

Policy-based QoS is not supported on logical interfaces, such as port-channels, VLANs, or Loopbacks.

bandwidth-percentage

Assign a percentage of weight to the class/queue.

Syntax

bandwidth-percentage 

percentage

To remove the bandwidth percentage, use the 

no bandwidth-percentage 

command.

Parameters

percentage

Enter the percentage assignment of weight to the class/
queue. The range is from 1 to 100% (granularity 1%).

Defaults

none

Command 
Modes

CONFIGURATION (conf-qos-policy-out)

Command 
History

Version 9.2(0.0)

Introduced on the M I/O Aggregator. This command is 
supported in Programmable-Mux (PMUX) mode only.

Version 8.3.16.1

Introduced on the MXL 10/40GbE Switch IO Module.

1078

Quality of Service (QoS)

Содержание MXL 10GbE










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды