UMN:CLI
User Manual
V8102
608
It
’s the waiting time for the restarting of Neighboring router’s BGP process. Restart
time allows BGP process time to restart and implement the internal connection (The
session). However, if it
’s not working properly, it is considered as the router stops op-
erating.
•
Stalepath Time
After BGP process of Neighboring router is restarted, it holds the time until BGP up
dates the path information. In case that the information of BGP routes is not updated
until the stalepath time, the switch discards this BGP routes information.
To set restart time or stalepath time on Graceful Restarting algorithm, use the following
command.
Command
Mode
Description
bgp graceful-restart restart-time
<1-3600>
Router
Sets the restart time of Graceful Restart configuration
in the unit of second.
1-3600: restart time (default: 120)
bgp graceful-restart stalepath-
time
<1-3600>
Sets the stalepath-time of Graceful Restart configura-
tion in the unit of second.
1-3600: stalepath time (default: 30)
If you don
’t use Graceful Restart feature or want to return the default value for restart time
or stalepath time, use the following command.
Command
Mode
Description
no bgp graceful-restart restart-
time
[<1-3600>]
Router
Restores the default value for restart time.
no
bgp
graceful-restart
stalepath-time
[<1-3600>]
Restores the default value for stalepath time.
You can restart configured graceful for BGP, OSPF and RIP in
Privileged EXEC Enable
mode, use the following command.
Command
Mode
Description
restart bgp graceful
Enable
Restarts the configured BGP graceful.
restart ospf graceful
[
grace-
period
<1-1800>]
Restarts the configured OSPF graceful in the unit of
second.
1-1800: grace-period (unit: seconds)
restart ipv6 ospf graceful
[
grace-
period
<1-1800>]
Restarts the configured IPv6 OSPF graceful in the unit
of second.
1-1800: grace-period (unit: seconds)
restart rip graceful
[
grace-period
<1-65535>]
Restarts the configured RIP graceful in the unit of sec-
ond.
1-65535: grace-period (unit: seconds)
Содержание V8102
Страница 1: ...1 V8102 GPON OLT system User Manual...
Страница 158: ...UMN CLI User Manual V8102 158 When you use the no snmp command all configurations of SNMP will be lost...
Страница 427: ...User Manual UMN CLI V8102 427 show debugging dhcp Enable Global Shows the debugging information of DHCP...
Страница 797: ...User Manual UMN CLI V8102 797 show onu gsp status config ONU_ID tag list number TAG_NAME tag name...