Dasan V8102, Руководство пользователя

Страница: 187 / 910

User Manual
UMN:CLI
V8102
187
ethernet oam meg MEG-NAME
vlan { add | del } VLAN
Creates a MEG name and specifies
MEG’s VID.
VLAN: MEG's VID
no ethernet oam meg NAME Deletes the configured MEG with a unique name.
7.7.2.2 Creating MEP
To determine a MEG End Point (MEP) with MEP ID for a specific MEG and configure
MEP
’s direction, use the following command.
Command Mode Description
ethernet oam mep mepid <1-
8191> meg MEG-NAME
Global
Configures a MEP ID on a port of specific MEG.
1-8191: source MEP ID for OAM PDU to send
MEG-NAME: MEG name
no ethernet oam mep mepid <1-
8191> meg MEG-NAME
Deletes the configured MEP.
To create MEP, you need to create MEG first.
To assign the MEP
and MEP’s direction, use the following command.
Command Mode Description
ethernet oam mep assign mepid
<1-8191> meg MEG-NAME direc-
tion up
Interface
[XE/GE/CG]
Assigns the configured MEP.
ethernet oam mep assign mepid
<1-8191> meg MEG-NAME direc-
tion down
7.7.2.3 Creating MIP
To determine a MEG Intermediate Point (MIP) and specify its level, use the following
command.
Command Mode Description
ethernet oam mip level <0-7>
Interface
[XE/GE/CG]
Configures a MIP on an interface port and specifies
MIP
’s level.
0-7: MIP
’s level to use
no ethernet oam mip Deletes the configured MIP.
To configure a default MEG with its level or MHF use, use the following command.
Command Mode Description
ethernet oam default-meg de-
fault level <0-7>
Global
Creates a default MEG and specifies MEG
’s level
0-7: the level to be created dynamic MHF
ii