User Manual
UMN:CLI
V8102
671
SPF-HOLD: 0-4294967295 (default: 10)
To release the configuration, use the following command.
Command
Mode
Description
no timers spf
Router
Release the configuration.
12.2.13
External Routes to OSPF Network
If other routing protocol redistribute into OSPF network, these routes become OSPF ex-
ternal routes. Other routing protocols are RIP and BGP. And static route, connected route,
kernel route are also external route. Those routing information can distribute into OSPF
network.
There are 4 kinds of additional configuration about external routes to OSPF network.
metric
is configures Metric value of the default route,
metric-type
is for type of finding
the path.
metric-type 1
uses internal path cost with external path cost as a cost, metric
type 2 always uses external cost value.
route-map
is transmission of specific routing in-
formation to assigned route which has MAP-NAME, and,
tag
is using the assign tag num-
ber on the specific MAP-NAME.
Those 4 kinds of additional configuration can be selected more than 2 options without or-
der, and it applies to consistent across all external routes in an attached network.
The following is explaining 4 options of command:
•
metric
<0-16777214>
•
metric-type
<1-2>
•
route-map
MAP-NAME
•
tag
<0-4294967295>
To configure the external route transmission, use the following command.
Command
Mode
Description
redistribute
{
bgp
|
connected
|
kernel
|
rip
|
static
}
metric
<0-16777214>
Router
Configures the external route transmis-
sion.
redistribute
{
bgp
|
connected
|
kernel
|
rip
|
static
}
metric-type
<1-2>
redistribute
{
bgp
|
connected
|
kernel
|
rip
|
static
}
route-map
MAP-NAME
redistribute
{
bgp
|
connected
|
kernel
|
rip
|
static
}
tag
<0-4294967295>
The following example shows how to configure it with more than 2 options:
•
redistribute
{
bgp
|
connected
|
kernel
|
rip
|
static
}
metric
<0-16777214>
tag
<0-
4294967295>
•
redistribute
{
bgp
|
connected
|
kernel
|
rip
|
static
}
tag
<0-4294967295>
metric-
type
<1-2>
Содержание V8102
Страница 1: ...1 V8102 GPON OLT system User Manual...
Страница 158: ...UMN CLI User Manual V8102 158 When you use the no snmp command all configurations of SNMP will be lost...
Страница 427: ...User Manual UMN CLI V8102 427 show debugging dhcp Enable Global Shows the debugging information of DHCP...
Страница 797: ...User Manual UMN CLI V8102 797 show onu gsp status config ONU_ID tag list number TAG_NAME tag name...