Dasan V8102, Руководство пользователя

Страница: 575 / 910

User Manual
UMN:CLI
V8102
575
< 0-4294967294> [VLAN/GPO
N]
0-4294967294: priority value (default: 1)
no ipv6 pim dr-priority
[< 0-4294967294>]
Deletes the specified DR priority.
11.3.2.3 Neighbor Filtering
If necessary, you can filter neighbor routers using access lists. When you enable this fea-
ture, PIM establishes adjacency without neighbor routers specified as deny in access lists.
To enable filtering neighbor routers in PIM, use the following command.
Command Mode Description
ipv6 pim neighbor-filter WORD
Interface
[VLAN]
Enables filtering neighbor routers in PIM.
WORD: access list name
no ipv6 pim neighbor-filter
WORD
Disables filtering neighbor routers in PIM.
WORD: access list name
To display the information of PIM neighbor routers, use the following command.
Command Mode Description
show ipv6 pim neighbor [ detail ]
Enable
Global
Shows the information for PIM neighbor routers.
show ipv6 pim neighbor NAME
[ X:X::X:X ] [ detail ]
show ipv6 pim neighbor { chan-
nelgroup | gpon | loopback |
management | tengigabitether-
net } IFPORT [ detail ]
show ipv6 pim neighbor { chan-
nelgroup | gpon | loopback |
management | tengigabitether-
net } IFPORT X:X::X:X [ detail ]
show ipv6 pim neighbor vlan
VLANID [ detail ]
show ipv6 pim neighbor vlan
VLANID X:X::X:X [ detail ]
11.3.2.4 PIMv6 Join/Prune Message Group Filtering
If necessary, you can filter PIMv6 join/prune messages from separate group using access
lists. When you enable this feature, a specified PIM group of PIM join/prune messages
from the trusted neighbor are denied by a specified range of access lists.
To enable PIMv6 group filtering, use the following command.
Command Mode Description
ipv6 pim group-filter {<1-99> |
Interface
Enables PIMv6 group filtering to block PIMv6
join/prune messages using a specified access list.