Dasan V8102, Руководство пользователя

Страница: 747 / 910

User Manual
UMN:CLI
V8102
747
13.1.14 ONU RX-Power Update
To configure the interval of ONU rx-power update, use the following command.
Command Mode Description
onu rx-power update {<1-1440> |
disable }
Global
Configures the interval of ONU rx-power update.
1-1440: interval (unit: minute)
disable: do not update
To display the configuration of ONU rx-power update, use the following command.
Command Mode Description
show onu rx-power update
Enable
Global
Interface
[GPON]
Shows the configuration of ONU rx-power update.
To display the received signal power information from an ONU, use the following com-
mand.
Command Mode Description
show olt rx-power gpon OLT-ID
[ ONU-ID ]
Enable
Global
Shows OLT RX signal power from all ONUs.
show olt rx-power
Enable
Global
Shows the configuration of OLT rx-power update.
show olt rx-power [ ONU-ID ]
Interface
[GPON]
Shows OLT RX signal power from an ONU.
13.1.15 Configurations for RF Return Packet Forwarding
In case the ONUs are connected with the set-top-boxes supporting Ethernet return path
capabilities, GPON OLT can use Ethernet for the return path to head-end infrastructure.
Deploying an ONU/MDU with an RF to Ethernet converter enables RF-digital-RF conver-
sion. At the ONU, the upstream return path packet is carried in GPON OLT. The GPON
OLT aggregates the packets from the ONUs and sends them to the Ethernet to RF con-
verter as the head-end node. This RF converter converts the Ethernet signals to back to
RF signal.
To specify the destination MAC address, ethertype, and VLAN ID for the head-end node
on the connection to send RF return path traffic, use the following command.
Command Mode Description
onu rf-pw dst-mac MACADDR
Global
Sets the destination MAC address of RF return path
modulator
’s FPGA.
onu rf-pw ethtype TYPE-NUM Sets the ethernet type and VLAN ID for RF return path
traffic forwarding.
TYPE-NUM: ethernet type (e.g. 0x8864 - PPPoE)
onu rf-pw vid <1-4094>