User Manual
UMN:CLI
V8102
159
7.2
Link Layer Discovery Protocol (LLDP)
Link Layer Discovery Protocol (LLDP) is the function of transmitting data for network
management for the switches connected in LAN according to IEEE 802.1ab standard.
7.2.1
LLDP Operation
The V8102 supporting LLDP transmits the management information between near
switches. The information carries the management information that can recognize the
network elements and the function. This information is saved in internal Management In-
formation Base (MIB).
When LLDP starts to operate, the switches send their information to near switches. If
there is some change in local status, it sends their changed information to near switch to
inform their status. For example, if the port status is disabled, it informs that the port is
disabled to near switches. And the switch that receives the information from near switch-
es processes LLDP frame and saves the information of the other switches. The infor-
mation received from other switches is aged.
7.2.2
Enabling LLDP
To enable/disable LLDP, use the following command.
Command
Mode
Description
lldp enable
Interface
[XE/GPON]
Enables LLDP function on a port.
lldp disable
Disables LLDP function.
7.2.3
LLDP Operation Type
If you activated LLDP on a port, configure LLDP operation type.
Each LLDP operation type works as one of the followings:
•
both
sends and receive LLDP frame.
•
tx_only
only sends LLDP frame.
•
rx_only
only receives LLDP frame.
•
disable
does not process any LLDP frame.
To configure how to operate LLDP, use the following command.
Command
Mode
Description
lldp adminstatus
{
both
|
tx_only
|
rx_only
|
disable
}
Interface
[XE/GPON]
Configures LLDP operation type.
(default: both)
7.2.4
Basic TLV
LLDP is transmitted through TLV. There are mandatory TLV and optional TLV. In optional
TLV, there are basic TLV and organizationally specific TLV. Basic TLV must be in the
switch where LLDP is realized, specific TLV can be added according to the feature of the
switch.
Содержание V8102
Страница 1: ...1 V8102 GPON OLT system User Manual...
Страница 158: ...UMN CLI User Manual V8102 158 When you use the no snmp command all configurations of SNMP will be lost...
Страница 427: ...User Manual UMN CLI V8102 427 show debugging dhcp Enable Global Shows the debugging information of DHCP...
Страница 797: ...User Manual UMN CLI V8102 797 show onu gsp status config ONU_ID tag list number TAG_NAME tag name...