User Manual
UMN:CLI
V8102
261
7.18.10.3
Access List ZeBos for UDP
To create an access-list (ACL) to filter packets specific to the UDP protocol, use the fol-
lowing command.
Command
Mode
Description
ipv6 access-list zebos WORD
{
deny
|
permit
}
udp
{
SOUR_ADDR
|
SOUR_ADDR_RANGE
|
any
}
{
DES_ADDR
|
DES_ADDR_RANGE
|
any
}
[{
eq
|
lt
|
gt
|
ne
} <0-65535> |
range
<0-65535> <0-65535>]
Global
Specifies a deny or permit statement of the Zebos ex-
tanded ACL to filter packets specific to the UDP proto-
col.
WORD: access-list name
deny: specifies route to deny.
permit: Specified route to permit.
SOUR_ADDR: source IPv6 address to match
(X:X::X:X/M)
SOUR_ADDR_RANGE: source IPv6 address range to
match (X:X::X:X X:X::X:X)
DES_ADDR: destication IPv6 address to match
(X:X::X:X/M)
DES_ADDR_RANGE: destication IPv6 address range
to match (X:X::X:X X:X::X:X)
eq: Specifies a destination port as equal to a given
value. (0-65535: actual equal value)
lt: Specifies a destination port as less than a given
value. (0-65535: actual less than value)
gt: Specifies a destination port as greater than a given
value. (0-65535: actual greater than value)
ne: Specifies a destination port as not equal to a given
value. (0-65535: Not equal than value)
label: Identifies an application. (1-65535: actual label
value)
precedence: Identifies a packet filter precedence level.
tos: Type of service (ToS) value to filter packets.
pkt-size: Identifies packet size.
gt: packet size less than or greater than specified val-
ue.
lt: packet size less than or greater than specified value.
(0-65535: packet size)
fragments: An ACL applies to the non-initial fragment of
packet.
log: logs the results.
interface: the name of the input or output interface.
ipv6 access-list zebos WORD
{
deny
|
permit
}
udp
{
SOUR_ADDR
|
SOUR_ADDR_RANGE
|
any
}
{
DES_ADDR
|
DES_ADDR_RANGE
|
any
}
[{
eq
|
lt
|
gt
|
ne
} <0-65535> |
range
<0-65535> <0-65535>] {
label
<1-
65535> |
precedence
<0-7> |
tos
{<0-255> |
range
<0-255> <0-
255>} |
pkt-size
{
lt
|
gt
} <0-
65535> |
range
<0-65535> <0-
65535> |
fragments
|
log
|
inter-
face
{
in
|
out
} [{
tengigabitether-
net
IFPORT
|
gpon
IFPORT
|
channelgroup
IFPORT
|
vlan
VLANID
}]
no
ipv6
access-list
zebos
WORD
{
deny | permit
}
udp
{
SOUR_ADDR
|
SOUR_ADDR_RANGE
|
any
}
{
DES_ADDR
|
DES_ADDR_RANGE
|
any
}
[{
eq
|
lt
|
gt
|
ne
} <0-65535> |
range
<0-65535> <0-65535>] {
label
<1-
65535> |
precedence
<0-7> |
tos
Deletes the configured ZeBos extanded ACL entry.
Содержание V8102
Страница 1: ...1 V8102 GPON OLT system User Manual...
Страница 158: ...UMN CLI User Manual V8102 158 When you use the no snmp command all configurations of SNMP will be lost...
Страница 427: ...User Manual UMN CLI V8102 427 show debugging dhcp Enable Global Shows the debugging information of DHCP...
Страница 797: ...User Manual UMN CLI V8102 797 show onu gsp status config ONU_ID tag list number TAG_NAME tag name...