Dasan V8102, Руководство пользователя

Страница: 749 / 910

User Manual
UMN:CLI
V8102
749
no onu vlan-gem-mapping
[ ONU-ID [ vid RANGE ] | all [ vid
RANGE ]]
Deletes the GEM port mapping configuration above.
The traffic is not transmitted while the GEM port mapping mode is being changed due to
user configuration.
To configure the downstream GEM port mode per flow, use the following command.
Command Mode Description
olt per-flow vid RANGE mapping-
method { mac | mac-vid | vid }
Interface
[GPON]
Configures a downstream GEM port mapping
based on flow.
no olt per-flow [ vid RANGE ]
Deletes the configured downstream GEM port
mapping per flow.
To display the configuration of downstream traffic control, use the following command.
Command Mode Description
show onu vlan-gem-mapping
[ gpon OLT-ID ]
Enable
Global
Shows VLAN ID mapped to GEM port of ONU.
show olt ds-gem-mapping [ gpon
OLT-ID ]
Shows the GEM port mapping mode configured on the
OLT.
show olt per-flow [ gpon OLT-ID ]
[ VLANS ]
Shows the downstream GEM Port mode per flow.
show onu vlan-gem-mapping
[ ONU-ID ]
Interface
[GPON]
Shows VLAN ID mapped to GEM port of ONU.
show olt ds-gem-mapping
Shows the GEM port mapping mode configured on the
OLT.
show olt per-flow [ VLANS ] Shows the downstream GEM Port mode per flow.
If the V8102 is configured in the downstream GEM mapping mode per flow, you can con-
figure downstream QoS mapping mode based on MAC address / VLAN ID and the map-
ping between queue and CoS value. To configure the downstream traffic control by QoS
mapping, use the following command.
Command Mode Description
olt ds-qos-mapping mode { mac |
vid }
Interface
[GPON]
Configures the downstream QoS mapping mode.
(This configuration is valid only when the downstream
GEM port mapping mode is specified as
‘flow’.)
mac: QoS mapping mode based on destination MAC
address
vid: QoS mapping mode based on VLAN ID
mac vid: QoS mapping mode based on MAC + VLAN
ID
olt ds-qos-mapping queue- Configures the queue count and priority value accord-
i