Dasan V8102, Руководство пользователя

Страница: 763 / 910

User Manual
UMN:CLI
V8102
763
13.2.1.3 Manual ONU (ONT) Registration Mode
To register/delete ONU (ONT) manually, use the following command.
Command Mode Description
onu add ONU-ID SERIAL_NUM
{ auto-learning | PASSWD [ enable
| disable ]}
Interface
[GPON]
Registers ONU (ONT) with specified ONU-ID, serial
number and password.
Enables/disables the password auto-learning mode of
the ONU (ONT)
ONU-ID:ONU ID (1 to 128) or ONU serial number
SERIAL_NUM: ONU
’s serial number
PASSWD: ONU password
no onu ONU-ID Deletes the registered ONU with ONU ID.
13.2.1.4 ONU Registration Mode
The default ONU registration mode is the auto mode in which an OLT registers ONUs au-
tomatically, when recognizing the optical signal from the ONUs. For an optimized ONU
configuration, however, the manual mode is recommended. Some options are only avail-
able in the manual mode.
Upon registering an ONU automatically, the registration mode of the ONU will be changed
to the manual mode. Note that when you use this command, the registration mode of the
ONUs that are already registered in the auto mode will be changed to the manual mode
as well.
To change the ONU registration mode from auto to manual mode, use the following
command.
Command Mode Description
olt auto-to-manual gpon OLT-ID
enable
Global
Sets the current ONU registration mode to the manual
mode.
OLT-ID: GPON port number
olt auto-to-manual enable
Interface
[GPON]
To change the ONU registration mode from manual to auto mode, use the following
command.
Command Mode Description
olt auto-to-manual gpon OLT-ID
disable
Global
Sets the current ONU registration mode to the auto
mode.
olt auto-to-manual disable
Interface
[GPON]
To display the ONU registration mode, use the following command.
Command Mode Description
show olt auto-to-manual
[ gpon OLT-ID ]
Enable/Global Shows the current ONU registration mode.