Dasan V8102, Руководство пользователя

Страница: 353 / 910

User Manual
UMN:CLI
V8102
353
no policy admin NAME
Global
Deletes specified admin policy.
no policy admin all Deletes all admin policies.
After opening Admin-Policy Configuration mode, an admin policy can be configured by
user. You can specify the rule action for the classified packets in each admin-policy.
•
The admin-policy name must be unique. Its size is limited to 32 significant characters.
•
The admin- policy name cannot start with the alphabet
“a” or “A”.
•
The order in which the following configuration commands are entered is arbitrary.
•
The configuration of an admin policy being configured can be changed as often as
wanted until the apply command is entered.
•
Use the show policy-profile admin command to display the configuration entered
up to now.
If you create the admin policy already, you need to include specified flow or class to spec-
ify the rule action for the packets matching configured classifying patterns on flow or class.
To include specific flow or class in an admin policy, use the following command.
Command Mode Description
include-flow NAME
Admin-
Policy
Includes an admin flow in a specified policy.
NAME:admin-flow name
include-class NAME
Includes an admin class in a specified policy.
NAME:admin-class name
One admin policy cannot include both flow and class at the same time. Either admin flow
or admin class can belong to one policy.
To remove flow or class from the policy, use the following command.
Command Mode Description
no include-flow
Admin-
Policy
Removes the admin flow from this policy.
no include-class Removes the admin class from this policy.
9.3.7.2 Admin Policy Priority
If rules that are more than two match the same packet then the rule having a higher priori-
ty will be processed first. To set a priority for an admin access rule, use the following
command.
Command Mode Description
priority { highest | high | medium |
low }
Admin-
Policy
Sets a priority for an admin policy.
(default: low)
9.3.7.3 Admin Policy Action
To specify the rule action ( action match ) for the packets matching configured classifying
patterns, use the following command.
!
i