Dasan V8102, Руководство пользователя

Страница: 602 / 910

UMN:CLI
User Manual
V8102
602
no aggregate-address A.B.C.D/M
as-set [ summary-only ]
Router Disables the summarization function of routes.
no aggregate-address A.B.C.D/M
summary-only [ as-set ]
12.1.9 Route Reflector
Route reflectors are a solution for the explosion of iBGP peering within an autonomous
system. By route reflection the number of iBGP peers within an AS is reduced. To config-
ure the local router as the route reflector and specify neighbors as its client, use the fol-
lowing command.
Command Mode Description
neighbor { A.B.C.D | WORD |
X:X::X:X} route-reflector-client
Router
Configures BGP route reflector and specifies a neigh-
bor as its client.
A.B.C.D: BGP neighbor address in IPv4 format
X:X::X:X: BGP neighbor address in IPv6 format
WORD: existing peer group name or neighbor tag
no neighbor { A.B.C.D | WORD |
X:X::X:X} route-reflector-client
Deletes the configured BGP route reflector and the
specified neighbor as its client.
An AS can have more than one route reflector. One route reflector treats the other route
reflector as another BGP speaker.
A cluster includes route reflectors and its clients. Usually, each cluster is identified by the
router ID of its single route reflector but to increase redundancy sometimes a cluster may
have more than one route reflector. All router reflectors in such a cluster are then identi-
fied by a cluster ID.
To configure the cluster ID if the BGP cluster has more than one route reflector, use the
following command.
Command Mode Description
bgp cluster-id {<1-4294967295> |
A.B.C.D }
Router
Specifies the cluster ID of this router acting as a route
reflector.
1-4294967295: route reflector cluster-id
no cluster-id [ A.B.C.D ] Removes the cluster ID.
The client-to-client reflection is used to configure routers as route reflectors. Route reflec-
tors are used when all Interior BGP (iBGP) speaker are not fully meshed. To ena-
ble/disable the client-to-client reflection, use the following command.
Command Mode Description
bgp client-to-client reflection
Router
Enables the client-to-client reflection.
no bgp client-to-client reflection Disables the client-to-client reflection.
When a router is configured as a route reflector, client-to-client reflection is enabled by
i
i