Cisco Catalyst 3560-E Series, Руководство по эксплуатации

Страница: 87 / 150

2-69
Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switch System Message Guide
OL-9772-05
Chapter 2 Message and Recovery Procedures
PLATFORM_SPAN Messages
Error Message
PLATFORM_RPC-3-SEND_FAIL: Failed to send RPC message in class [dec],
req [dec], [chars].
Note
This message applies only to Catalyst 3750-X and 3750-E switches.
Explanation
There is a local resource error or that too many outgoing messages are queued for the
message class. The first [dec] is RPC request class, the second [dec] is the RPC request number, and
[chars] is an optional comment.
Recommended Action
Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
“Error
Message Traceback Reports” section on page 1-7 .
Error Message
PLATFORM_RPC-3-UNABLE_TO_SEND: System is unable to send RPC message:
[chars], paks_outstanding: [int].
Note
This message applies only to the Catalyst 3750-X and 3750-E switches.
Explanation
The system had a low-level transport failure when trying to send an RPC message.
[chars] is a description of the error returned by the low-level packet sending driver that triggered the
error (usually one of these:
fifo full , fifo empty , out of buf , out of mem , null pointer , misc failure ),
and [int] is the number of packets outstanding (packets from the RPC code to the driver that have
not yet been sent).
Recommended Action
Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
“Error
Message Traceback Reports” section on page 1-7 .
PLATFORM_SPAN Messages
Error Message
PLATFORM_SPAN-3-FEATUREMISMATCH:[chars] cannot be supported with the
image running on switch [dec].
Explanation
A switch stack member software image does not support a specific flow-based SPAN
(FSPAN) access control list (ACL) filter. [chars] is the FSPAN ACL filter that is not supported, and
[dec] is the stack member number.
Recommended Action
Upgrade to an image that supports the FSPAN ACL filter.