Cisco Catalyst 3560-E Series, Руководство по эксплуатации

Страница: 90 / 150

2-72
Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switch System Message Guide
OL-9772-05
Chapter 2 Message and Recovery Procedures
PLATFORM_STACKPOWER Messages
Error Message
PLATFORM_STACKPOWER-4-CABLE_B_CURRENT_IN: Switch [dec] stack power
cable 2 inward current is over the limit
Explanation
Power cable 2 of the switch stack has an inward current that is over 40 A. Add another
power supply to the switch stack. [dec] is the stack member number.
Recommended Action
Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
“Error
Message Traceback Reports” section on page 1-7 .
Error Message
PLATFORM_STACKPOWER-4-CABLE_A_CURRENT_OUT: Switch [dec] stack power
cable 1 outward current is over the limit
Explanation Power cable 1 of the switch stack has an outward current that is over 40 A. Remove a
power supply from the switch stack. [dec] is the stack member number.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
“Error
Message Traceback Reports” section on page 1-7 .
Error Message
PLATFORM_STACKPOWER-4-CABLE_B_CURRENT_OUT: Switch [dec] stack power
cable 2 outward current is over the limit
Explanation
Power cable 2 of the switch stack has an outward current that is over 40 A. Remove a
power supply from the switch stack. [dec] is the stack member number.
Recommended Action
Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
“Error
Message Traceback Reports” section on page 1-7 .
Error Message
PLATFORM_STACKPOWER-4-UNDER_BUDGET: Switch [dec] does not have
sufficient power budget
Explanation The power budget of the switch is less than the minimum required switch budget.
[dec] is the stack member number.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
“Error
Message Traceback Reports” section on page 1-7 .