Cisco Catalyst 3560-E Series Скачать руководство пользователя страница 114

Страница: 114 / 150

2-96

Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switch System Message Guide

OL-9772-05

Chapter 2 Message and Recovery Procedures

QOSMGR Messages

Error Message

QOSMGR-4-MATCH_NOT_SUPPORTED: Match type is not supported in classmap

[chars].

Explanation

An unsupported match type was entered. Only the

access-group

acl-index-or-name,

dscp

dscp-list

, and

ip precedence

ip-precedence-lis

t match types are supported with the

match

class-map configuration command. [chars] is the class-map name.

Recommended Action

Reconfigure the class map using only the

match access-group

match ip dscp

and

match ip precedence

class-map configuration commands within the class map.

Error Message

QOSMGR-4-NOT_SUPPORTED: Action ’[chars]’ is not supported for a

policymap attached to output side.

Explanation

set

trust

policy-map class configuration command was configured in a policy map

and attached to an egress interface. A warning message is logged, and the actions do not take effect.
This is a hardware limitation. [chars] is either the set or trust action.

Recommended Action

Do not configure a

set

trust

policy-map class configuration command in a

policy map and attach it to an egress interface. These policy-map actions are supported only on
ingress interfaces.

Error Message

QOSMGR-4-POLICER_PLATFORM_NOT_SUPPORTED: Policer configuration has

exceeded hardware limitation for policymap [chars].

Explanation

The policy-map configuration has exceeded the hardware limitation. An attempt to

configure more policers in all policy maps (by using the

police

police aggregate

policy-map class

configuration command) than supported by the hardware, which is not allowed, caused this
condition. [chars] is the policy-map name.

Recommended Action

Reconfigure the class maps or the policy maps, or delete the policy map from

some interfaces.

Error Message

QOSMGR-4-POLICER_POLICY_NOT_SUPPORTED: Number of policers has exceeded

per policy hardware limitation for policymap [chars].

Explanation

The policy-map configuration has exceeded the hardware limitation. An attempt to

configure more policers in a policy map (by using the

police

police aggregate

policy-map class

configuration command) than supported by the hardware, which is not allowed, caused this
condition. [chars] is the policy-map name.

Recommended Action

Reconfigure the class map or the policy map, and reduce the number of

policers.

Содержание Catalyst 3560-E Series























































































































































Результаты поиска

Содержание Catalyst 3560-E Series

Отзывы:

Похожие инструкции для Catalyst 3560-E Series

Бренды по названию

Популярные бренды

Cisco Catalyst 3560-E Series, Руководство по эксплуатации

Результаты поиска

Содержание Catalyst 3560-E Series

Отзывы:

Похожие инструкции для Catalyst 3560-E Series

Бренды по названию

Популярные бренды