Cisco Catalyst 3560-E Series Скачать руководство пользователя страница 67 | Manualshive

Страница: 67 / 150

background image

2-49

Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switch System Message Guide

OL-9772-05

Chapter 2 Message and Recovery Procedures

IMAGEMGR Messages

contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the

“Error

Message Traceback Reports” section on page 1-7

.

Error Message

ILPOWER-5-POWER_GRANTED: Interface [chars]: Power granted.

Explanation

The switch can provide power to the interface. [chars] is the interface.

Recommended Action

No action is required.

Error Message

ILPOWER-5-SENSE_POWER_INVALID: Interface [chars]: invalid power sense

[dec] milliwatts current [dec] mA voltage [dec] mV

Explanation

The power-monitoring voltage or current value is invalid. [chars] is the interface. The

first [dec] is the power-monitoring cutoff value, the second [dec] is the real-time power consumption
in mA, and the third [dec] is the real-time power consumption in mV.

Recommended Action

Copy the message exactly as it appears on the console or in the system log.

Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the

“Error

Message Traceback Reports” section on page 1-7

.

Error Message

ILPOWER-7-DETECT: Interface [chars]: Power Device detected:[chars].

Explanation

The switch has detected a connected powered device. The first [chars] is the interface.

The second [chars] is the Cisco pre-standard powered device or the IEEE-compliant powered device.

Recommended Action

No action is required.

IMAGEMGR Messages

Note

These messages apply only to the Catalyst 3750-X and 3750-E switches.

Error Message

IMAGEMGR-6-AUTO_ADVISE_SW_INITIATED: Auto-advise-software process

initiated for systems [bits: [hex]].

Explanation

Systems with incompatible software have been detected in the switch stack.

Auto-advise software informs you when not all switches in the stack are running the same software
version. The stack master then attempts to upgrade all switches running different versions to the
version that the master is running. The stack finds out whether or not software is available to be
copied to the incompatible systems and if so, advises you how to copy it. Otherwise, the system
informs you that the software on the switch stack needs to be updated. [bits [hex]] is the bit
representation of the switch number.

Recommended Action

No action is required.

«
...
65
66
67
68
69
...
»

Содержание Catalyst 3560-E Series























































































































































Отзывы:

Нет отзывов

Похожие инструкции для Catalyst 3560-E Series

Express Ethernetwork DI-704P

Бренд: D-Link Страницы: 17

Бренд: GAMDIAS Страницы: 15

ACC-CX3RDK-CU5640

Бренд: e-con Systems Страницы: 9

PowerBeam AC Gen2

Бренд: Ubiquiti Страницы: 22

Бренд: red lion Страницы: 5

Бренд: 4G Systems Страницы: 2

Бренд: Uniden Страницы: 5

Бренд: Z3 Technology Страницы: 67

Бренд: Quantum Страницы: 7

AT32F421 Series

Бренд: ARTERY Страницы: 337

Бренд: Accusys Страницы: 34

Бренд: Tripp Lite Страницы: 2

Бренд: Cypress Semiconductor Страницы: 31

Бренд: Uctronics Страницы: 12

Бренд: ZALMAN Страницы: 9

Gen3 Ethernet Module

Бренд: NCD Страницы: 18

Бренд: 3Com Страницы: 63

Бренд: ZALMAN Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды