Cisco Catalyst 3560-E Series, Руководство по эксплуатации

Страница: 22 / 150

2-4
Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switch System Message Guide
OL-9772-05
Chapter 2 Message and Recovery Procedures
ACLMGR Messages
Error Message
ACLMGR-2-NOVMR: Cannot generate hardware representation of access list
[chars]
Explanation
Available resources are not sufficient to create a hardware representation of the ACL. A
lack of available logical operation units or specialized hardware resources can cause this problem.
Logical operation units are needed for a TCP flag match or a test other than
eq ( ne , gt , lt , or range )
on TCP, UDP, or SCTP port numbers.
Recommended Action
Modify the ACL configuration to use fewer resources, or rename the ACL with
a name or number that alphanumerically precedes the other ACL names or numbers.
Error Message
ACLMGR-3-ACLTCAMFULL: Acl Tcam Full. Drop packets on Output Acl label
[dec] on [chars] [chars].
Explanation The platform-specific TCAM cannot support the number of configured ACLs. [dec] is
the label number, and [chars] is the layer. The first [chars] is for Layer 3, and the second [chars] is
for Layer 2. If only the Layer 2 or Later 3 hardware table is full, only one string appears, and the
other string is
NULL
.
Recommended Action Reduce the number of IP or MAC access lists to be applied to interfaces.
Error Message
ACLMGR-3-AUGMENTFAIL: Augmenting of access-map [chars] on [chars]
label [dec] failed.
Explanation
The system ran out of CPU DRAM when trying to merge internally required elements
with the configured access maps. The first [chars] is the access-map name, the second [chars] is the
direction in which the map was applied (
input or output ), and [dec] is the label number.
Recommended Action
Reduce other system activity to ease memory demands.
Error Message
ACLMGR-3-IECPORTLABELERROR: ACL labels are out-of-sync on interface
[chars], label [dec] is not available on asic [dec].
Explanation An internal software error has occurred. [chars] is the interface name. The first [dec] is
the label associated with the ACL, and the second [dec] is the ASIC number.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
“Error
Message Traceback Reports” section on page 1-7 .