Cisco Catalyst 3560-E Series, Руководство по эксплуатации

Страница: 71 / 150

2-53
Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switch System Message Guide
OL-9772-05
Chapter 2 Message and Recovery Procedures
PIMSN Messages
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
“Error
Message Traceback Reports” section on page 1-7 .
Error Message
PHY-4-SFP_NOT_SUPPORTED: The SFP in [chars] is not supported
Explanation
The SFP module type is not supported on this switch. [chars] is the interface.
Recommended Action
Remove the unsupported SFP module, and get a supported SFP module.
Error Message
PHY-4-UNSUPPORTED_SFP_CARRIER: Unsupported SFP carrier module found in
[chars]
Explanation The SFP carrier module was identified as an unsupported, non-Cisco SFP carrier
module. [chars] is the unsupported module.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
“Error
Message Traceback Reports” section on page 1-7 .
Error Message
PHY-4-UNSUPPORTED_TRANSCEIVER:Unsupported transceiver found in
[chars]
Explanation
The SFP module was identified as an unsupported, non-Cisco SFP module. [chars] is
the unsupported module.
Recommended Action
Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
“
Error Message Traceback Reports” section on page 1-5.
PIMSN Messages
Error Message
PIMSN-6-IGMPSN_GLOBAL: PIM Snooping global runtime mode [chars] due to
IGMP Snooping [chars].
Explanation When IGMP snooping is disabled, PIM snooping is disabled. When IGMP snooping is
re-enabled, PIM snooping is re-enabled. The first [chars] is the PIM snooping mode, and the second
[chars] is the IGMP snooping mode.
Recommended Action No action is required.