Cisco Catalyst 3560-E Series Скачать руководство пользователя страница 49

Страница: 49 / 150

2-31

Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switch System Message Guide

OL-9772-05

Chapter 2 Message and Recovery Procedures

EC Messages

Error Message

EC-5-ERRPROT: Channel protocol mismatch for interface [chars] in group

[dec]: the interface can not be added to the channel group.

Explanation

The interface cannot be added to the channel group with the specified mode. [chars] is

the interface, and [dec] is the channel group.

Recommended Action

Change the channel group or the mode for the interface.

Error Message

EC-5-ERRPROT2: Command rejected: the interface [chars] is already part

of a channel with a different type of protocol enabled.

Explanation

The interface cannot be selected for the specified protocol because it is already part of

a channel with a different protocol. [chars] is the interface.

Recommended Action

Remove the interface from the channel group.

Error Message

EC-5-ERRPROT3: Command rejected: the interface [chars] is already part

of a channel.

Explanation

The interface cannot be unselected for the specified protocol because it is already part

of a channel group. [chars] is the interface.

Recommended Action

Remove the interface from the channel group.

Error Message

EC-5-L3DONTBNDL1: [chars] suspended: PAgP not enabled on the remote

port.

Explanation

PAgP is enabled on the Layer 3 interface but the partner port is not enabled for PAgP.

In this mode, the port is placed in a suspended state. [chars] is the Layer 3 interface.

Recommended Action

Enable PAgP on the remote side by using the

channel-group

interface

configuration command.

Error Message

EC-5-L3DONTBNDL2: [chars] suspended: LACP currently not enabled on the

remote port.

Explanation

LACP is enabled on a Layer 3 interface but is not enabled on the partner port. In this

mode, the port is put in a suspended state. [chars] is the interface name.

Recommended Action

Enable LACP on the remote side.

Error Message

EC-5-L3DONTBNDL3: [chars] suspended: LACP not enabled on the remote

port.

Explanation

LACP is enabled on a Layer 3 interface but the remote port does not have LACP

enabled. In this mode, the local port is put in a suspended state. [chars] is the interface name.

Recommended Action

Enable LACP on the remote port.

Содержание Catalyst 3560-E Series























































































































































Результаты поиска

Содержание Catalyst 3560-E Series

Отзывы:

Похожие инструкции для Catalyst 3560-E Series

Бренды по названию

Популярные бренды

Cisco Catalyst 3560-E Series, Руководство по эксплуатации

Результаты поиска

Содержание Catalyst 3560-E Series

Отзывы:

Похожие инструкции для Catalyst 3560-E Series

Бренды по названию

Популярные бренды