Cisco Catalyst 3560-E Series Скачать руководство пользователя страница 126

Страница: 126 / 150

2-108

Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switch System Message Guide

OL-9772-05

Chapter 2 Message and Recovery Procedures

STACKMGR Messages

Error Message

STACKMGR-3-NORECORD: Switch removed event for switch [dec] with no

switch record.

Explanation

The stack manager received a switch-removed event for which there is no switch record.

[dec] is the switch number.

Recommended Action

No action is required.

Error Message

STACKMGR-4-MASTER_ELECTED: Switch [dec] has been elected as MASTER of

the stack.

Explanation

The specified switch has been elected stack master. [dec] is the switch number of the

elected stack master.

Recommended Action

No action is required.

Error Message

STACKMGR-4-STACK_LINK_CHANGE: Stack Port [chars] Switch [dec] has

changed to state [chars].

Explanation

The specified stack port status has changed state to up or down. The first [chars] is the

stack port (1 or 2), [dec] is the switch number, and the second [chars] is the new state (up or down).

Recommended Action

No action is required.

Error Message

STACKMGR-4-SWITCH_ADDED: Switch [dec] has been ADDED to the stack.

Explanation

The specified stack member switch has been added to the stack. [dec] is the switch

number.

Recommended Action

No action is required.

Error Message

STACKMGR-4-SWITCH_ADDED_SDM: Switch [dec] has been ADDED to the stack

(SDM_MISMATCH).

Explanation

The specified switch has been added to the stack. [dec] is the switch number.

SDM_MISMATCH means that the added switch cannot support the SDM template that the stack
master is using. Subsequent SDM-6-MISMATCH_ADVISE messages explain the mismatch and
recommend corrective actions.

Recommended Action

No action is required unless SDM_MISMATCH is displayed. For

SDM_MISMATCH corrective actions, see SDM-6-MISMATCH_ADVISE.

Error Message

STACKMGR-4-SWITCH_ADDED_VM: Switch [dec] has been ADDED to the stack

(VERSION_MISMATCH).

Explanation

A switch that has been added to the stack has a different software version. [dec] is the

switch number.

Recommended Action

No action is required.

Содержание Catalyst 3560-E Series























































































































































Результаты поиска

Содержание Catalyst 3560-E Series

Отзывы:

Похожие инструкции для Catalyst 3560-E Series

Бренды по названию

Популярные бренды

Cisco Catalyst 3560-E Series, Руководство по эксплуатации

Результаты поиска

Содержание Catalyst 3560-E Series

Отзывы:

Похожие инструкции для Catalyst 3560-E Series

Бренды по названию

Популярные бренды