Cisco Catalyst 3560-E Series Скачать руководство пользователя страница 110 | Manualshive

Страница: 110 / 150

background image

2-92

Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switch System Message Guide

OL-9772-05

Chapter 2 Message and Recovery Procedures

PT Messages

PT Messages

Error Message

PT-3-PT_HW_UNAVAIL: Protocol Tunneling hardware resource not

available. [chars]

Explanation

Protocol tunneling could not be enabled because no redirect registers are available.

Protocol tunneling requires redirect registers. [chars] is the hardware resource that is not available.

Recommended Action

Disable any applications that use redirect registers, and try configuring the

protocol tunneling again.

QOSMGR Messages

Error Message

QOSMGR-3-FEATURE_NOT_FOUND: Cannot find feature for [chars].

Explanation

An internal software error has occurred. [chars] is the description of the feature that the

software cannot find.

Recommended Action

Copy the message exactly as it appears on the console or in the system log.

Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the

“Error

Message Traceback Reports” section on page 1-7

.

Error Message

QOSMGR-3-FILTERTYPE_INVALID: Internal Error Invalid Policy filtertype

[dec].

Explanation

An internal software error has occurred. [dec] is the invalid filter type identification.

Recommended Action

Copy the message exactly as it appears on the console or in the system log.

Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the

“Error

Message Traceback Reports” section on page 1-7

.

Error Message

QOSMGR-3-MERGE_RES_COUNT: Internal Error Invalid count.

Explanation

An internal software error has occurred.

Recommended Action

Copy the message exactly as it appears on the console or in the system log.

Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the

“Error

Message Traceback Reports” section on page 1-7

.

«
...
108
109
110
111
112
...
»

Содержание Catalyst 3560-E Series























































































































































Отзывы:

Нет отзывов

Похожие инструкции для Catalyst 3560-E Series

NetDefend DFL-260E

Бренд: D-Link Страницы: 328

ShareCenter Pulse DNS-320

Бренд: D-Link Страницы: 2

DFL-210 - NetDefend - Security Appliance

Бренд: D-Link Страницы: 19

Бренд: D-Link Страницы: 22

Бренд: D-Link Страницы: 4

Бренд: Dahua Страницы: 12

NetDefend DFL-1600

Бренд: D-Link Страницы: 23

Бренд: Quatech Страницы: 27

DIRECTOR PRO series

Бренд: MF DIGITAL Страницы: 79

Бренд: WABCO Страницы: 29

Бренд: Avaya Страницы: 73

PG-Flex FLC-704

Бренд: PairGain Страницы: 20

Бренд: Lattice Semiconductor Страницы: 43

ACCULINK 3161 CSU

Бренд: Paradyne Страницы: 19

Serial Attached SCSI (SAS) Expander Card

Бренд: Adaptec Страницы: 26

Бренд: SIIG Страницы: 8

Бренд: BinTec Страницы: 2

Бренд: ST Страницы: 37

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды