Centaur 2001 950, Руководство по обслуживанию, Страница: 36 / 450

Engine System Centaur Service Manual
Ontario Drive & Gear Limited www.centaur8x8.ca
(519) 662-2840 FAX (519) 662-2421
EN-12
Changing Engine Oil
During the initial engine break-in period, change the oil after the first 25 hours of operation.
After the break-in period, change the engine oil every 150 operating hours, or more frequently
if the vehicle is operated in dusty or dirty conditions.
Draining the Engine Oil
Each engine is equipped with a drain plug for draining the oil. The drain plug location is
shown in the engine owner’s manual. Drain the oil from the engine as follows:
1. Start and warm up the engine so the oil will drain easily.
2. Level the vehicle so the oil will drain completely.
3. Place a suitable container under oil drain of engine and remove drain plug with a
wrench.
There is limited space between the engine and transmission. Cut down an empty plastic
container to the correct height so it will fit under the engine oil drain. Make sure the
container will hold the amount of oil in the engine.
A ziploc plastic bag makes a convenient oil container. It conforms to the space available
and can be closed securely when the oil is drained, then lifted neatly out of the engine
compartment.
PLEASE DISPOSE OF WASTE OIL PROPERLY TO CONSERVE OUR ENVIRONMENT.
4. When all the oil has been drained from the engine, clean and replace the drain plug.
MAKE SURE it is properly tightened before refilling the engine.
5. See Oil Filter Replacement on page EN-14
Refilling the Engine
Refill the engine through the oil fill with the correct amount and grade of oil as indicated
on the previous page. As you add oil, frequently check the level with the dipstick. Do not
overfill. Start engine. Check for leaks. Stop the engine. Check the oil level. Add oil only
to the “F” mark on the dipstick.