BYD Suri, Руководство пользователя

Страница: 208 / 224

BYD Suri Owner
‘s Manual
Maintenance7-24
5. Remove the bulb of the small lamp,
and replace with a new bulb.
6. Screw the small lamp in place
clockwise.
7. Cover the sealed cap.
8. Plug in the electrical connector and
ensure that it is fully inserted.
9. (Driver's side) fit the battery.
10. Turn on the headlights to test the
new bulbs.
Front turn signal lights
1. Close the Start button, and then
open the hood.
2. Press the reed and unplug the
electrical connectors downward.
3. Rotate the lamp holder
counterclockwise a quarter turn to
remove it from the headlight
assembly.
4. Pull out the bulb directly from its
holder.
5. Insert the new bulb into the holder
directly until it reaches the bottom of
the holder.
6. Insert the lamp holder back into the
headlight assembly. Rotate clockwise
to lock it in place.
7. Test the lights to confirm that the
new bulb is working properly.
FRIENDLY TIPS

Do not replace the bulb when it
is still hot to prevent being burnt.

Halogen bulbs have pressurized
gas inside, and special care is
needed. If the lamp is scratched
or falls to the ground, explosion
or rupture may be caused. You
can only hold the plastic part or
metal box of the bulb. Do not
touch glass surface of the bulb
with bare hands.
Replacing the daytime running
light bulb
Halogen bulbs are used in your
vehicle. When replacing the bulb, hold
the plastic jacket, and do not touch or
let hard object contact the bulb glass.
In the case of accidental touch on the
bulb glass, wipe it with denatured
alcohol and a clean cotton cloth.
Reed
Lamp
holder
Small
lamp