Bull NovaScale R460 E2, Руководство пользователя, Страница: 99 / 490

Configuring Your Server 4-15
Server
Option Parameter Description Your Setting
System
Management – System Management submenu is displayed.
Console
Redirection – Console Redirection submenu is displayed.
BMC LAN
Configuration – BMC LAN Configuration submenu is displayed.
Event Log
Configuration – Event Log Configuration submenu is displayed.
Assert NMI on
PERR Disabled
[Enabled] Specify whether to support PCI PERR or not.
Assert NMI on
SERR Disabled
[Enabled] Specify whether to support PCI SERR or not.
FRB-2 Policy Disable FRB2
Timer
[Retry 3 Times]
Always Reset Set the FRB level 2 timer.
Boot Monitoring [Disabled]
5 Minutes
10 minutes
15 minutes
20 minutes
25 minutes
30 minutes
35 minutes
40 minutes
45 minutes
50 minutes
55 minutes
60 minutes Specify whether to enable or disable the boot
monitoring function on booting, or select the time limit
for timeout.
To use this function, install NEC ESMPRO Agent. Set
this item to "Disabled" if the system is booted from OS
without installation of NEC ESMPRO Agent.
Boot Monitoring
Policy [Retry 3 Times]
Always Reset Specify the processing at the occurrence of timeout
during boot monitoring.
If [Retry 3 times] is selected, the system is reset after
the occurrence of timeout and OS boot is retried up to
three times.
If [Always Reset] is selected, the system is reset after
the occurrence of timeout and OS boot is retried
repeatedly.
* If no service partition exists in the system, OS boot is
retried repeatedly from the system partition.
Thermal Sensor Disabled
[Enabled] Specify whether to enable or disable the thermal sensor
monitoring function. If a thermal error is detected with
this item being set to "Enabled", the system stops at the
end of POST.
BMC IRQ Disabled
[IRQ 11] Determines routing of the BMC interrupt.
Post Error Pause Disabled
[Enabled] Specify whether to stop the POST once at the end of
POST if an error occurs during the POST.
AC-LINK Stay Off
[Last State]
Power On
Specify the state of power when the AC power to the
server is turn off once and then on.
Power ON Delay
Time (Sec) [20] - 255 Specify the power on delay time within the range
between 20 and 255 seconds. The time specified is
valid when "Power On" or "Last State" is specified for
AC LINK.
Platform Event
Filtering Disabled
[Enabled] Specify whether to enable or disable the platform event
filtering (PEF) feature.
[ ]: Factory-set
IMPORTANT: To power on the server from the UPS (Uninterruptible Power Supply), select
[Server] - [AC LINK] - [Power On].