Bull NovaScale R460 E2, Руководство пользователя, Страница: 96 / 490

4-12 Configuring Your Server
Security
The Security menu appears if you move the cursor to the position of "Security."
Press
Enter
on "Set Supervisor Password" or "Set User Password," to display the following screen.
Enter the passwords on the dialog box. Passwords may have up to eight characters including alphanumerics and symbols.
IMPORTANT:
„
User password can be set only when Supervisor password is already set.
„
Set the passwords only after OS is installed.
See the table below for the items.
Option Parameter Description Your Setting
Security Chip
Configuration – Security Chip Configuration submenu is displayed.
User Password Is Clear Status only, user cannot modify.
Once set, this can be disabled by setting it to a null
string, or by clearing password jumper on system
board (see Configuring Mother Board Jumpers in this
Chapter).
Set
Supervisor
Password Is Clear Status only, user cannot modify.
Once set, this can be disabled by setting it to a null
string, or by clearing password jumper on system
board (see Configuring Mother Board Jumpers in this
Chapter).
Set
Set User
Password Up to eight
alphanumerics Supervisor password controls access to the setup
utility.
When Enter is pressed, the user is prompted for a
password; press
Esc
to abort. Once set, this can be
disabled by setting it to a null string, or by clearing
password jumper on system board (refer to Configuring
Mother Board Jumpers in this chapter).
Set Supervisor
Password Up to eight
alphanumerics When the <Enter> key is pressed, the user is
prompted for a password; press ESC key to abort.
Once set, this can be disabled by setting it to a null
string, or by clearing password jumper on system
board (refer to Configuring Mother Board Jumpers in
this
chapter).
Password on boot [Disabled] Disables or enables password entry on boot.
Enabled
Fixed disk boot
sector Will write protect the boot sector of the hard drive to
prevent viruses from corrupting the drive under DOS if
set to write protect. [Normal]
Write Protect
Power Switch
Inhibit [Disabled] Enables or disables the POWER switch mask feature.
If "Enabled" is selected, power-off with the POWER
switch becomes unavailable after OS boot-up. (Forced
shut down feature is always acceptable to the server.
Forced shut down is a feature to shut down by
pressing the POWER switch for at least four seconds.)
Enabled