Bull NovaScale R460 E2, Руководство пользователя, Страница: 67 / 490

Setting Up Your Server 3-3
SELECTING SERVER SITE
To use the server, install it on a standard EIA 19-inch rack assembly.
Refer to the documentation attached to the rack or contact your service representative for the installation of the server on the
rack.
WARNING
Observe the following instructions to use the server safely. Failure to follow these instructions may result
in death or serious personal injury. See pages 1-3 to 1-13 for details.
„
Do not use the server in any unapproved place.
„
Do not connect the ground line to a gas pipe.
CAUTION
Observe the following instructions to use the server safely. Failure to follow these instructions may cause
a fire, personal injury, or property damage. See pages 1-3 to 1-13 for details.
„
Do not carry or install the server only by a single person.
„
Do not install the server where the load may be concentrated on a specific point.
„
Do not install any component on the server only by a single person.
„
Insert the hinge pins completely.
„
Do not pull out a device from the rack if the rack is unstable.
„
Do not leave more than one device being pulled out from the rack.
„
Do not provide the wiring exceeding the rating power.
„
Do not use the server in a place where corrosive gases exist.
Do not install the rack in the places listed below. Installing the rack or mounting the server on the rack in such a place may
cause some malfunction to occur.
„
Narrow space from which devices cannot be pulled out from the rack completely
„
Place that cannot bear the total weights of the rack and devices mounted on the rack
„
Place where stabilizers cannot be installed or where the rack can be installed only after the practice of proper
earthquake-resistant construction
„
Place of uneven or slanting floor
„
Place of drastic temperature change (near a heater, air conditioner, or refrigerator)
„
Place where intense vibration may be generated
„
Place where corrosive gases (sulfur dioxide, hydrogen sulfide, nitrogen dioxide, chlorine, ammonia, ozone, etc) exist.
Place where the air (or dust) includes components accelerating corrosion (ex. sulfur, sodium chloride) or conductive
metals.
Place where chemicals may be accidentally sprayed over
„
Place where a carpet not subject to anti-static process is laid.
„
Place where some objects may be fallen on the rack
„
Place near a device generating intense magnetic field (such as a TV, radio, broadcast/communication antenna, power
transmission wire, and electromagnetic crane) is placed (If unavoidable, contact your service representative to
request proper shield construction.)
„
Place where the power cord of the server must be connected to an AC outlet that shares the outlet of another device
with large power consumption.
„
Place near equipment that generates power noise (e.g., contact spark at power-on/power-off of commercial power