Bull NovaScale R460 E2 Скачать руководство пользователя страница 416

Страница: 416 / 490

D-12 Installing Windows Server 2008

Change the password, and then click the

button.

NOTE:

The Windows Server 2008 password must combine

uppercase letters, lowercase letters, and numbers.

When the following message appears, click [OK].

At the command prompt, enter user information.

NOTE:

For more detailed procedure, see the "Microsoft Windows Server 2008 Step-By-Step

Guide".

After installations is completed, be sure to execute the tasks described in "Setup of Device Driver (Normally Install in Server)"

and "Updating the System" of this chapter.

Updating the System

Update the system in the situation below:

CPU is expanded (expanded to single processor to multi-processor).

Modified system configuration.

Recovered the system using recovery process.

The system update brings the correction program provided by Microsoft to be applied to reinforce the system security.

Содержание NovaScale R460 E2











































































































































































































































































































































































































































































































Результаты поиска

Содержание NovaScale R460 E2

Отзывы:

Bull NovaScale R460 E2, Руководство пользователя, Страница: 416 / 490

Результаты поиска

Содержание NovaScale R460 E2

Отзывы: