Bull NovaScale R460 E2, Руководство пользователя, Страница: 219 / 490

Installing the Operating System with Express Setup 5-65
Installing with the OEM-Disk for Mass Storage Device
This section explains how to setup with the OEM-Disk. You usually do not have to do as follows. If your system has any Mass
storage devices, you have to set as follows depending on your system. The detailed information is provided by the manual of
the Mass storage device.
Creating New RAID using RAID Controller
If you create new RAID using RAID Controller, create RAID by following procedure before installing Windows Server 2008.
If you do not need to create new RAID, this procedure is not required.
Case of creating RAID using [EXPRESSBUILDER].
1.
Boot from the EXPRESSBUILDER DVD.
2.
Select [Perform the Express setup] from the Top Menu, click [Next].
3.
When [Load parameters] screen is displayed, if you do not need to load parameters, select [Do not load parameters]
and click [Next].
4.
Select [Install other Operating System] at [Select OS] steps, and then click [Next].
5.
Select [Create a logical drive using the settings that follow] at [Enter RAID settings] steps.
Confirm the parameters, modify if necessary, and then click [Next].
6.
Save parameters at [Save parameters] steps.
If you do not need to save parameters, select [Do not save parameters], and click [Next].
7.
Click [Perform] at [Configuring RAID] steps.
RAID configuration is started.
8.
When [Exit EXPRESSBUILDER] screen is displayed, click [Perform] again.
The system reboots.
Reboot from EXPRESSBUILDER DVD, and then perform Express Setup referring to [Installing the Operating
System with Express Setup].
NOTE: When you start Express Setup, select [Skip the logical drive creation] at Step 4 [Enter
RAID settings] screen.