Bull NovaScale R460 E2 Скачать руководство пользователя страница 243

Страница: 243 / 490

Installing and Using Utilities 6-23

BULL PRODUCT INFO COLLECTION UTILITY

The Bull Product Info Collection Utility is software installed in this server.

Various information on the server can be collected at maintenance and the trouble, etc.

This utility can be installed from ExpressBuilder DVD.

Installation

The procedure when individually installing it is shown as follows.

Insert ExpressBuilder DVD in the optical disk drive after OS starts.

Click from the menu displayed with Auto-run in order of [Setup software] – [Product Info Collection Utility].

The installation of this utility is started. (It is installed in "System drive: \ezclct" folder.)

IMPORTANT:

Please log-in the system in account with the administrator authority.

2.5GB or more free space is required for the installation drive.

Содержание NovaScale R460 E2











































































































































































































































































































































































































































































































Результаты поиска

Содержание NovaScale R460 E2

Отзывы:

Bull NovaScale R460 E2, Руководство пользователя, Страница: 243 / 490

Результаты поиска

Содержание NovaScale R460 E2

Отзывы: