Bull NovaScale R460 E2 Скачать руководство пользователя страница 249 | Manualshive

Страница: 249 / 490

Bull NovaScale R460 E2 Скачать руководство пользователя страница 249

Maintenance 7-5

Cleaning Disc

A dusty disc or dust-accumulated tray causes the device to fail to read data correctly.
Follow the procedure below to clean the tray and disc regularly:

1.

Make sure that the server is powered (the POWER/SLEEP LED is lit).

2.

Press the CD tray Open/Close button on the front of the optical disk drive.

The tray opens.

3.

Hold the disc lightly and take it out from the tray.

NOTE:

Do not touch the signal side of the disc with your hand.

4.

Wipe the tray with a dry soft cloth.

IMPORTANT:

Do not wipe the lens of the optical disk drive. Doing so may damage the lens and

may cause a malfunction of the drive.

5.

Push on the tray front to close the tray.

6.

Wipe the signal side of the disc with a dry soft cloth.

IMPORTANT:

Wipe disc from the center to the outside. Use only disc cleaner if necessary.

Cleaning a disc with record spray/cleaner, benzene, or thinner causes damage to the disc contents.

At worst, inserting the disc into the server may cause failure.

«
...
247
248
249
250
251
...
»

Содержание NovaScale R460 E2











































































































































































































































































































































































































































































































Отзывы:

Нет отзывов