Bull NovaScale R460 E2 Скачать руководство пользователя страница 74 | Manualshive

Страница: 74 / 490

Bull NovaScale R460 E2 Скачать руководство пользователя страница 74

3-10 Setting Up Your Server

2.

At least two persons are required to install the server. Securely hold the server and install it in the rack.
Firmly fit the inner rails on the sides of the server into the rail assemblies that are installed on the rack, and then

slowly push the server into the rack.

Rail assembly

Inner rail at server side

3.

If the server is locked on its way into the rack, slowly push it in while pressing the release levers (blue) on the right

and left sides of the server forward or rearward.
When the server is completely pushed into the rack, the server is locked.

Release lever (blue)

IMPORTANT:

Be very careful not to get your finger caught in the levers or rails.

Insert both sides of inner rails straight into the rack.

Hold the thumbscrews on both sides of the server, and install the server carefully while making

sure the installation position.

NOTES:

At the first installation, you may feel strong friction in pushing because the mechanical

components cannot be completely engaged with each other. Push the server intensely.

If the installation is incomplete, either of rails may not go further on its way. In such a case,

pull out the server completely until it is locked. Then, push the server in while unlocking the

right and left sides of it.

«
...
72
73
74
75
76
...
»

Содержание NovaScale R460 E2











































































































































































































































































































































































































































































































Отзывы:

Нет отзывов