Bull NovaScale R460 E2 Скачать руководство пользователя страница 62 | Manualshive

Страница: 62 / 490

Bull NovaScale R460 E2 Скачать руководство пользователя страница 62

2-28 General Description

Optical Disk Drive

The server is provided with the optical disk drive on its front to read data from a disc.

CAUTION

Observe the following instructions to use the server safely. Failure to follow
these instructions may cause a fire, personal injury, or property damage. See
pages 1-3 to 1-13 for details.

Do not leave the tray ejected from the optical disk drive.

Set a disc on the optical disk drive in the following procedure.

1.

Confirm that the power of the server is on (with the POWER LED being lit in green) before setting the disc on the

optical disk drive.

2.

Press the Eject button on the front of the optical disk drive.
The tray comes out a little.

3.

Hold the tray lightly and pull it out toward you until the tray stops.

4.

Put the disc on the tray carefully and securely with the character printed surface facing upward.

5.

As shown in the figure below, hold the tray with a hand and press the disc with fingers of another hand to make the

hole of the disc fit to the rotor at the center of the tray.

Rotor

Press this part of disc.

6.

Push the front of the tray lightly to retract it into the drive.

«
...
60
61
62
63
64
...
»

Содержание NovaScale R460 E2











































































































































































































































































































































































































































































































Отзывы:

Нет отзывов