Bull NovaScale R460 E2 Скачать руководство пользователя страница 82 | Manualshive

Страница: 82 / 490

Bull NovaScale R460 E2 Скачать руководство пользователя страница 82

3-18 Setting Up Your Server

CONNECTING POWER CORD

Connect the provided power cord to the server.

WARNING

Observe the following instructions to use the server safely. Failure to follow these instructions may result
in death or serious personal injury. See pages 1-3 to 1-13 for details.

Do not hold the power plug with a wet hand.

Do not connect the ground wire to a gas pipe.

CAUTION

Observe the following instructions to use the server safely. Failure to follow these instructions may cause
a fire, personal injury, or property damage. See pages 1-3 to 1-13 for details.

Do not plug the power cord in to an improper power source.

Do not connect the power cord to an outlet that has an illegal number of connections.

Insert the power plug into the outlet as far as it goes.

Use the authorized power cord only.

1.

Plug the provided power cord into the power receptacle on the rear of the server.

2.

Plug the other end of the power cord into the wall outlet.
The AC power LED on the power supply turns green and flashes.

AC power LED

Power cord for power unit 1

Power cord for power unit 2

Power unit 2

(option)

Power unit 2

(standard)

IMPORTANT:

Secure the power cord with an AC cord holder on the rear of the server.

To connect the power cord from the server to an uninterruptive power supply (UPS), use service outlets on the rear of the UPS.

Refer to the manual that comes with the UPS.
When the power cord from the server to a UPS, change the BIOS setup of the server to link with power supply from the UPS.
To power on the server from the UPS (Uninterruptible Power Supply), select [Server] - [AC-LINK] - [Power On].

Change a parameter for "AC-LINK" under the Server menu of the BIOS SETUP utility. See Chapter 4 for details.

«
...
80
81
82
83
84
...
»

Содержание NovaScale R460 E2











































































































































































































































































































































































































































































































Отзывы:

Нет отзывов