Bull NovaScale R460 E2 Скачать руководство пользователя страница 254 | Manualshive

Страница: 254 / 490

Bull NovaScale R460 E2 Скачать руководство пользователя страница 254

7-10 Maintenance

RELOCATING/STORING THE SERVER

Follow the procedure below to relocate or store the server:

CAUTION

Observe the following instructions to use the server safely. Failure to follow these instructions may cause
a fire, personal injury, or property damage. See pages 1-3 to 1-13 for details.

Never attempt to lift the server only by yourself.

Do not install the server in any place other than specified.

Do not connect/disconnect any interface cable with the power cord of the server plugged to a power
source.

IMPORTANT:

If the server needs to be relocated/stored due to a change in the floor layout to a great extent,

contact the service representative.

Make sure to make a backup copy of your valuable data in the hard disk drive, if any.

Make sure not to apply a shock to hard disk drives to relocated the server if the contains any.

1.

Take a media out of the server, if any.

2.

Power off the server (the POWER/SLEEP LED goes off).

3.

Unplug the power cord of the server from a power outlet.

4.

Remove all the cables from the server.

5.

Hold the server by its bottom with at least three persons to carry the server.

IMPORTANT:

Do not hold the front door to lift the server. The front door may be disengaged

from the server, causing personal injury.

6.

Protect the server with the shock-absorbing materials, and pack it securely.

«
...
252
253
254
255
256
...
»

Содержание NovaScale R460 E2











































































































































































































































































































































































































































































































Отзывы:

Нет отзывов